The model is ready. Estimated 19 hours of printing for both parts and around 180 grams of PLA altogether. Like the original, the top will be black and the bottom will be white or semi-transparent. The power switch and power LED are optional.
My 3D printer is not printing too well, but just well enough to make a home-made PSU case:
I added the LED and the power switch. Otherwise the power will be on once the 220v plug gets inserted into the mains.
The engraving will be added later, after the PSU gets tested for many hours.
Currently testing the PSU with Philips VG-0010 MSXC and Nemesis3:
The model of the case is available here:
https://www.thingiverse.com/thing:3707359
I PROVIDE NO WARRANTY OF ANY KIND FOR THIS SOLUTION! Please be aware about the hazards when installing the 220v rated PSU into the case! Observe all safety regulations when working with high voltage appliances!
Final view with engraving:
The image for engraving has been uploaded into the repository.
