The Big MegaFlashROM SCC+ SD Topic

Página 95/95
88 | 89 | 90 | 91 | 92 | 93 | 94 |

Por enribar

Paragon (1170)

Imagen del enribar

22-04-2022, 08:43

Manuel wrote:

Did you read the manual?

I'm not really sure that this wesite https://msxcartridgeshop.com/ is updated with the last compatibile release of Nextor, and what it could happen if there's a mismatch between version of Nextor, MM, partitions, etc. (for ex. the GR8NET could have problems in case of mismatches).
A complete update package and unique procedure is welcome.

Por sdsnatcher73

Prophet (3203)

Imagen del sdsnatcher73

22-04-2022, 12:46

You have to get the updated OPFXSD.COM, RECOVERY.ROM from msxcartridgeshop.com and the NEXTOR.ROM from konamiman’s github. Put these together with MSXDOS.SYS and COMMAND.COM on a floppy disk and boot from that floppy.

Use OPFXSD to flash the latest recovery and Nextor kernel. To know which parameters you need first run OPFXSD without any parameters.

Por Manuel

Ascended (18777)

Imagen del Manuel

23-04-2022, 23:34

enribar wrote:
Manuel wrote:

Did you read the manual?

I'm not really sure that this wesite https://msxcartridgeshop.com/ is updated with the last compatibile release of Nextor, and what it could happen if there's a mismatch between version of Nextor, MM, partitions, etc. (for ex. the GR8NET could have problems in case of mismatches).
A complete update package and unique procedure is welcome.

No, this is all irrelevant. The manual tells you exactly how to restore/update all the parts in the flash ROM with OPFXSD.

As for Nextor, you can just replace the files with the latest Nextor release. Well, I guess replacing the files on the ROM disk is a bit tricky. (Maybe it's easier to skip the entire ROM disk anyway?)

Por msxski

Resident (62)

Imagen del msxski

29-04-2022, 23:24

2 questions.

- Is there a good guide for updating the FMR cartridge to the latest software and firmware?

- Is it possible to (temporarily) make a: writeable? I wanted to add a few lines to the autoexec.bat, and then lock a: again.

Por Manuel

Ascended (18777)

Imagen del Manuel

30-04-2022, 08:36

Did you check the manual already?

Por Stakker

Expert (65)

Imagen del Stakker

30-04-2022, 17:49

Hello again,

Got my Emu-FDC (very nice!), so now I'm trying to boot from a disk image in it to upgrade my NEXTOR.ROM.

But... how do I boot from Emu-FDC (Slot 2) while MFR is inserted (Slot 1)? I tried holding "R", but just get a blue screen.

The disk image in Emu-FDC has the required system files and boots fine if I remove MFR and put Emu-FDC in Slot 1.

Página 95/95
88 | 89 | 90 | 91 | 92 | 93 | 94 |