IDE Interface

Page 2/2
1 |

By Jipe

Paragon (1551)

Jipe's picture

24-05-2022, 15:42

can you take a picture of the inside of the cartridge to see if it has been updated at the hardware level ?
i have also the disk of the original soft with ver 1.00

By Jipe

Paragon (1551)

Jipe's picture

24-05-2022, 16:42

see this article on hnostar 43 sheet 32 and 33
https://issuu.com/msxblog/docs/club_hnostar__43

By ace82

Supporter (14)

ace82's picture

25-05-2022, 14:49

hello everyone and thanks for the tips

At this moment no device is connected to the interface.
before the update I had connected a hard drive that was working.
Now I would like to connect a controller for CF memory.
In the floppy supplied there are backups of the original firmware.
Over the weekend I will try to connect the controller and let you know if it works
Bye
Ace82 Smile

By ace82

Supporter (14)

ace82's picture

25-05-2022, 14:52

For Jipe
The cartridge is heat sealed
so it is impossible for me to take pictures .

Ace82 Smile

Page 2/2
1 |