MSX Omega DC Adapter Bracket

By RayneX

Resident (43)

RayneX's picture

23-06-2022, 05:58

As I was making the DC12V adapter for the Omega, I noticed the whole thing was completely dependent upon the 8 pin connector holding the adapter; taking all the pressure from plugging in and taking it out, so I decided to make an bracket so it would be solid without much movement but also takes the pressure off the pins. I'll upload the STL to either Thingiverse or Printables later on. Let me know what you think.

MSX Omega DC Adapter Bracket

Login or register to post comments