One chip MSX improvement project | MSX Resource Center (Page 113/123)

By HRA!

Champion (289)

28-02-2021, 21:58

OCM改 20210228 version
https://twitter.com/thara1129/status/1366010883852279809

By erpirao

Paragon (1304)

15-03-2021, 21:13

s-xm clone?
the original s-xm does not bring sound-in, will this clone bring it?
is that without sound in in the slot, it loses all interest

By AxelStone

Prophet (3189)

16-03-2021, 10:35

Why the specs specify that MSX-Audio and OPL3 are implemented?

"PSG, SCC+, MSX-Music, MSX-Audio and OPL3"

Are really implemented in FPGA?

By sdsnatcher73

Prophet (3808)

16-03-2021, 12:31

With the extra size it is quite possible of course. FlashJacks already uses implementations in FPGA of MSX-Audio and OPL3

By AxelStone

Prophet (3189)

16-03-2021, 12:33

sdsnatcher73 wrote:

With the extra size it is quite possible of course. FlashJacks already uses implementations in FPGA of MSX-Audio and OPL3

Yes I know, and also GR8Net implements MSX-Audio, but I didn't know the current status of the SM-X core. So it's true, it has a fully functional MSX-Audio including ADPCM features?

By bsittler

Master (247)

16-03-2021, 18:16

lintweaker wrote:

My MSX breakout for the DE0-CV FPGA board is ready for testing!
First tests show sound is working

That's a nice-looking MSX! Does BT1 socket mean RTC will be possible in this one so file time stamps can be correct without requiring manual or NTP synchronization each power-on somehow? Or will RTC still require more circuitry that isn't present yet?

By ducasp

Paladin (667)

16-03-2021, 22:23

erpirao wrote:

s-xm clone?
the original s-xm does not bring sound-in, will this clone bring it?
is that without sound in in the slot, it loses all interest

It doesn't? (real question, mine has sound input from cartridges mixed, but mine is an early prototype when it was named MSX-SM)

By ducasp

Paladin (667)

16-03-2021, 22:28

AxelStone wrote:

sdsnatcher73 wrote:

With the extra size it is quite possible of course. FlashJacks already uses implementations in FPGA of MSX-Audio and OPL3

Yes I know, and also GR8Net implements MSX-Audio, but I didn't know the current status of the SM-X core. So it's true, it has a fully functional MSX-Audio including ADPCM features?

I don't think SM-X implements MSX-Audio, it does implement OPL3, and OPL3 at some level might be considered compatible with MSX-Audio as far as FM / OPL general stuff, but it doesn't have formal MSX-Audio implementation or ADPCM as far as I know...

By Grauw

Ascended (10679)

16-03-2021, 22:43

The Y8950 ADPCM implementation could be borrowed from the YM2608 VHDL implementation. The differences are very minor so only small adjustments are needed.

By AxelF

Champion (395)

16-03-2021, 22:47

What i miss about my one chip MSX in a internal floppy controller, so i can connect a floppy drive and play games from floppy for nostalgic reasons. (Yes i have a floppy controller cartridge but it's not the same)