MSX Toshiba HX10 Video Output is not clear ?

Pagina 1/5
| 2 | 3 | 4 | 5

Door Hit-Biter

Master (160)

afbeelding van Hit-Biter

29-07-2022, 02:09

Hey Guys I've a Toshiba HX10 and when i turn it on the screen is not very sharp. OK the first problem is that if i turn the MSX on first and then the TV then its Black and White but if i turn the TV on first then the MSX then the load somehow makes the MSX display color. However the text and graphics are not very sharp and there's a , I'm not sure how to describe it, but there's lines coming of the text and graphics like as if they are moving left and leaving a speed trail to the right. Its especially bad in high res mode as any graphic has very noticeable blurry/ fuzzy lines coming away from the right hand edge of any graphic like lines or circles. Faulty video chip or just need a re-cap ? Thanks for your advice.

Aangemeld of registreer om reacties te plaatsen

Van gdx

Enlighted (5700)

afbeelding van gdx

29-07-2022, 02:24

There is no MSX with Video Output clear and it can be worse when certain components or welds fatigue.

RGB output is the clearest.

Van Wierzbowsky

Guardian (3492)

afbeelding van Wierzbowsky

29-07-2022, 12:26

LVA510 is probably dying. Needs a replacement.

Van CASDuino

Champion (296)

afbeelding van CASDuino

29-07-2022, 18:58

Are you using the RF or composite? Are you using LCD or CRT?

Van Hit-Biter

Master (160)

afbeelding van Hit-Biter

29-07-2022, 21:27

CASDuino wrote:

Are you using the RF or composite? Are you using LCD or CRT?

Im using RF to LCD.

Van Hit-Biter

Master (160)

afbeelding van Hit-Biter

29-07-2022, 21:28

Alexey wrote:

LVA510 is probably dying. Needs a replacement.

LVA510 ? Video Chip ?

Van gdx

Enlighted (5700)

afbeelding van gdx

29-07-2022, 21:59

It is not possible to have a clear picture with the RF output. Use the composite video output. It's not as clear as an RGB output but you have no choice.

Van Briqunullus

Hero (558)

afbeelding van Briqunullus

29-07-2022, 22:40

There may be some info about the LVA510 in this thread as well.

Van Hit-Biter

Master (160)

afbeelding van Hit-Biter

29-07-2022, 22:53

gdx wrote:

It is not possible to have a clear picture with the RF output. Use the composite video output. It's not as clear as an RGB output but you have no choice.

I will need a new cable for that. Your referring to the Video/Audio plugs ? Should i get a Twin Composite to SCART Connector ?

Van Manuel

Ascended (18950)

afbeelding van Manuel

29-07-2022, 23:43

What kind of screen are you connecting? Which inputs does it have?

Van Hit-Biter

Master (160)

afbeelding van Hit-Biter

29-07-2022, 23:57

Manuel wrote:

What kind of screen are you connecting? Which inputs does it have?

Hi Manuel, Its a LG19LS4D. It Has :-

AV1 - SCART
AV2 - SCART
HDMI/DVI IN
RS232C IN (Control & Service)
RGB(PC)IN
ANTENNA IN

and

COMPONENT IN : Comprising
Video:- (Y) Green,(Pb) Blue,(Pr) Red
Audio :- Left,Right

Pagina 1/5
| 2 | 3 | 4 | 5