One Chip MSX available for pre-order

Bazix have just started taking pre-orders on the RoHS and CE compliant version of the One Chip MSX, making it the first MSX computer produced for the Western market in more than 20 years. By default, the FPGA based computer will be configured as an MSX2 computer, with the following specifications:

1MB RAM and 128kB VRAM
Kanji ROM
MSX-DOS2 support
PS/2 connector
2 MSX joystick ports
2 MSX cartridge slots (with the 12V pins connected properly)
MegaSCSI implemented to addres the SD/MMC card slot
Hot-swappable SD/MMC flashcard slot with native FAT16 support in MSX-DOS2
MSX-MUSIC
SCC+
Composite and SVHS TV output
VGA monitor output (which can be used as an RGB-SCART compatible output as well)
2 cinch audio outputs
FPGA I/O pin (40 pins and 10 pins)
2 USB ports
32MB SDRAM

The following software and documentation will be delivered with the One Chip MSX:

English instruction manual, including a short introduction to VHDL
Full VHDL code used to achieve MSX2 compatibility (default configuration)
A CD-ROM with VHDL code examples and the following software:
- Altera Quantum2 Web Edition - VHDL development environment
- PLDLOAD and PLDSAVE - Softare to read and program the FPGA chip
- EP, FDLOAD and FDSAVE - Software to create, load and play disk images
220V adapter or 110V converter plug
Schematics to the One Chip MSX PCB
Blueprint of the One Chip MSX casing

On the updated One Chip MSX FAQ it is furthermore announced that the VHDL code to achieve MSX2 compatibility and alterations based on it can be redistributed freely for non-commercial use, giving the MSX community a headstart in upgrading the MSX2 standard. Bazix are also offering a free One Chip MSX restore service to their customers for a full year after purchase. This means that if something goes wrong with updating the FPGA chip and you don't have a Byte Blaster cable, you can send the One Chip MSX to Bazix to get it restored for you.

The One Chip MSX can now be pre-ordered, until November 21st, for € 192,44 ex VAT. On the One Chip MSX website at Bazix you can find out more about the specifications of the One Chip MSX, its design and the pre-ordering procedure.

Relevant link: One Chip MSX website at Bazix

Comentários (90)

Por sirpaul484

Rookie (23)

02-11-2006, 23:32

almost 300 dollars?? but.. I only... I only have $200 saved up for it...

Por rolins

Champion (418)

02-11-2006, 23:42

Christ, that is expensive. I don't think I have that much to spare. I was expecting a price tag of under $200.

Por ARTRAG

Enlighted (6980)

02-11-2006, 23:47

In Italy it cames 244€ included vat & shipping.
US is far...

Por capj

Supporter (7)

02-11-2006, 23:52

very disappointing price specially when compared to its price in japan... This doesnt even include shipping!!

Por Ivan

Ascended (9373)

03-11-2006, 00:01

A bit expensive... but I have already placed a pre-order.

Por wolf_

Ambassador_ (10135)

03-11-2006, 00:02

the 100$ computer? I'd say we pay $100 and send the rest of the bill to Nishi

Por Samor

Prophet (2225)

03-11-2006, 00:07

is the video output 60hz, or can it do 50hz as well?

Por wolf_

Ambassador_ (10135)

03-11-2006, 01:07

We shallt test the cart.ports in Nijmegen on Snout's prototype! If it's a real MSX, it should survive plugging in an SCC cart. while the system is turned on! My '45 always survived ^_^

Por spl

Paragon (1470)

03-11-2006, 02:08

I have done the pre-order. HOPE I will have my ONE CHIP MSX.

Por Vampier

Prophet (2415)

03-11-2006, 06:15

Can someone give me a quote to ship to the US? I might order 2 to come down on shipping costs.

Also in the US we do not pay VAT if it's sold over the internet and outside the state of California, does BAZIX honor this? I'm not planning to pay any Dutch tax since I do not support the Dutch government.

http://en.wikipedia.org/wiki/VAT#Value_Added_Tax_in_the_United_States

Por rolins

Champion (418)

03-11-2006, 07:30

@Vampier

192.44 Euros = 245 US dollars

Por cesco

Champion (454)

03-11-2006, 07:59

Quite expensive

Por Hydlide

Master (171)

03-11-2006, 08:00

pre-ordered. although I originally set my limit to €200, I think this opportunity cannot be missed. €239,90 including shipping (within NL) I believe. Expensive, yes. Cool? Very much so.

ETA: spring 2007, so y'all have more time to save money for it guys

Por Samor

Prophet (2225)

03-11-2006, 08:06

_wolf, my 8250 also can survive the SCC plugging... my vg8235 though, oh man.. then again, it died recently anyways.

Por Latok

msx guru (3960)

03-11-2006, 09:20

Awesome!! And indeed, it's only a couple of tenners more than expected. Less Turkey, less fireworks and here you go......

Por AuroraMSX

Paragon (1902)

03-11-2006, 09:26

Hm, pre-ordering now, delivery in 2007. That raises an interesting question: I'm in Germany and currently the VAT is at 16%. At January 1, 2007, though, the VAT will be raised to 19%. If I pre-order now, do I pay 16% or 19% VAT?

[edit]
Ow, the pre-order form fills in 19% automatically and adds another €13 (ex VAT) fro shipping&handling -- nice, that makes a total of €244. Quite a lot more than the anticipated €189 Anyway, pre-order placed

(Now, I just need to renegotiate my yearly salary increase )

Por snout

Ascended (15187)

03-11-2006, 09:30

Aurora - You will be paying 19% VAT anyway, as you are buying something FROM the Netherlands. For delivery to countries in the EU, Bazix has to charge 19% VAT, for countries outside the EU, VAT is 0%. For a quote inc shipping, just take a step or two in the pre-order process, you can easily select your country and the amount of OCMs you'd like to have to see what you will eventually be paying.

Por AuroraMSX

Paragon (1902)

03-11-2006, 09:49

Aurora - You will be paying 19% VAT anyway, as you are buying something FROM the Netherlands.Ok. Thanx for the info

Por Huey

Prophet (2696)

03-11-2006, 10:05

hesitating....hesitating.....hesitating........

Por AuroraMSX

Paragon (1902)

03-11-2006, 10:18

Altera Quantum2 Web Edition - VHDL development environment
Eh, why can't I find anything on this Quantum2 dev kit on Altera's site, or on the net?

a Byte Blaster cableDid anyone notice that this ByteBlaster cable costs about $300?

Por ARTRAG

Enlighted (6980)

03-11-2006, 10:33

quite expensive...
I am sure i did a silly thing, but I placed the order at the end...

Por jltursan

Prophet (2619)

03-11-2006, 10:35

The development software is "Quartus II", not "Quantum II"....just to avoid confussion

Por AuroraMSX

Paragon (1902)

03-11-2006, 10:37

The development software is "Quartus II", not "Quantum II"Ah, that's why

Por capj

Supporter (7)

03-11-2006, 10:39

for those asking about the VAT -- I'm not in europe, and when pre-ordering they just added shipping cost with no VAT

Por ivke2006

Expert (90)

03-11-2006, 11:04

Hmm, maybe a little expensive but if I look at the comments I find them to negative.
Please keep in mind It's a NEW MSX compatible computer!
So please give them at least some credit.

I placed my preorder 1 minute ago pfff...I can't wait to get that thing in my hands

I hope that in the future, it will be possible to order software from Woomb and play it on the 1CMSX (and old msx comp)

Por Tanni

Hero (556)

03-11-2006, 11:31

I've just completed my preorder of the OCM!

Por wolf_

Ambassador_ (10135)

03-11-2006, 11:36

When ppl are negative, it could be because they'll be comparing with a 'real' MSX and the features it has with all the extentions connected. The DIY aspect of the OCM is interesting, but perhaps not for everyone. If you aren't going to VHDL yourself (or run new VHDL code), I could imagine the OCM looks a tad overpriced.

Por Tanni

Hero (556)

03-11-2006, 11:45

The price will surely also depend on the amount of possible purchasers. If a company can expect lots of them, the price will be low, if not, it must be somewhat higher.

By the way: Snout, wouldn't it be possible to add the possibility to also preorder the ''reset cable'' to the preorder form?

Por ditman

Resident (35)

03-11-2006, 11:50

OMFG!

I declare to have filled out the pre-order form correctly and truthfully, and agree to buying the One Chip MSX for a price that does not exceed € 244.47 including VAT and shipping costs...

OMFG!

Por DarQ

Paragon (1038)

03-11-2006, 14:09

there is a big change that i will order this thing.. although it lacks quite some features which i'd LOVE to have around (as you all know, the TurboR, gfx9000 and opl4)... anyway... let see

btw: how can some stupid cable cost 300E ?!??

Por wolf_

Ambassador_ (10135)

03-11-2006, 14:23

The machine is already stuffed with msx2'ish things and minor expansions, and tho they're not optimized yet, I wouldn't put my hopes on OPL4, G9k en tR together in one OCM.

There is a far better chance that ppl design new gfx and audio VHDL, which won't have to include code to compensate for all the unique quirks of the common MSX stuff. On the bazix page it's mentioned that currently the SCC+ takes 6.5% and the MSX-Music 28.1% (all unoptimized). Perhaps you'd like to ditch the MSX-Music in favour for a 20-channel SCC+ instead? Also, since the SCC is simply a waveplayer, I could imagine, with some tweaking, it could play bigger waves, and tadaa.. we're -minus the FM- in OPL4 territory.

GFX-wise:

I can imagine that different palette colors for something sc5'ish is no issue in VHDL, that's one step towards the G9k already. Next, sc5 uses 4 bits per pixel. Perhaps it's even faster to just use 8 bits per pixel and make sure we have direct access to the videomem, without all kinda slow'ish hogs the 9938 has. So, it's all small steps that could be improved or changed. I'm sure a lot of resources are now 'wasted' on the OCM behaving exactly like an MSX2, ditch it and you'll have new realms to discover.

Por DarQ

Paragon (1038)

03-11-2006, 14:42

yeah, but i doubt 1MB RAM will serve for a proper OPL4 sram

Por wolf_

Ambassador_ (10135)

03-11-2006, 14:42

Imagine that the 9938 (now 22.3%, that's less than the MSX-MUSIC!) would drop to 18% orso.. what about having two 9938's! We already have the transparent color 0, I figure this next 9938 could provide an extra layer. As long as we dare to change the whole shebang of the OCM there are enough options for OPL4'ish and G9k'ish things.

Por wolf_

Ambassador_ (10135)

03-11-2006, 14:44

yeah, but i doubt 1MB RAM will serve for a proper OPL4 sram

The machine has 32MB, 1MB is just 'a' default config.

Por AuroraMSX

Paragon (1902)

03-11-2006, 14:48

When ppl are negative, it could be because they'll be comparing with a 'real' MSXMore like comparing €240 to the expected €190

btw: how can some stupid cable cost 300E ?!??I have no idea. I did some more research and if you just follow the link that google offers to "USB JTAG", you get cables/converters in aprice range from €10 upto the aforementioned €300...

Perhaps you'd like to ditch the MSX-Music in favour for a 20-channel SCC+ instead? Also, since the SCC is simply a waveplayer, I could imagine, with some tweaking, it could play bigger waves, and tadaa.. we're -minus the FM- in OPL4 territory.Ehm, plus you'll need more than 32 bytes per channel for wave memory, you'll need to add ADSR envelopes, LFO, and all that other stuff you don't want to handle through Z80 software. And I can imagine that that takes up more FPGA space than the MSX-Music now covers.

I can imagine that different palette colors for something sc5'ish is no issue in VHDL, that's one step towards the G9k already. Next, sc5 uses 4 bits per pixel. Perhaps it's even faster to just use 8 bits per pixel and make sure we have direct access to the videomem, without all kinda slow'ish hogs the 9938 has.Ah, ditch screens 5~8, include a full color screen 4 with full color sprites and you're 3/4 way to Gfx9000 P1 mode

Por DarQ

Paragon (1038)

03-11-2006, 14:50

anyway, i just placed a preorder as well... im very eager to receive a nice package next year
im less eager to buy that cable whilst i'd really like to have that as well

Por ARTRAG

Enlighted (6980)

03-11-2006, 15:13

BTW the use of the transparent and of two VDP is intriguing.
And the development should be easy and direct (you duplicate an existing module)

I can imagine great parallactic scrollings ... moreover one could halve the levels of all the colors of the VDP in background , in order to have up to 32 colors in a scr5-scr5 configuration and a background with suited colors

Also a scr5 on scr8 configuration is interestiing...

Por wolf_

Ambassador_ (10135)

03-11-2006, 15:50

I actually think I'd keep one config safe for MBWave/FM and use another config to try all these low-level gfx/audio things myself.. I just hope all this programming is not too tricky

Por robertwilting

Champion (467)

03-11-2006, 16:12

Quote:
--------------------------------------------------------------------------------
Did anyone notice that this ByteBlaster cable costs about $300?
--------------------------------------------------------------------------------
No because a quick search gave me prices between $15.00 -$150.00

Then you still need to solve shipping. But that's no real problem. So it should be possible to get this cabble for less then 50 euro's including shipping.

If that's to expensive then you could also build it yourself since the schematics are out on the net.

Por Ivan

Ascended (9373)

03-11-2006, 17:21

Yesterday I read that I would receive an email to confirm the preorder. Haven't received anything so far. Have you experienced the same?

Por AuroraMSX

Paragon (1902)

03-11-2006, 17:25

JTAG cables are professional tools, so their prices are very high even if they are stupid dummy cables...
The point is that each development system has its own cable (to avoid you could save money reusing the same twice )Ehm, I thought that the idea of JTAG was to finally have one standard solution. And I would still be very interested in knowing the differnce between an €300 JTAG cable and a €10 one...

Por Niles

Hero (545)

03-11-2006, 17:41

Agree with all of you: quite expensive... (some guys at Bazix will change their cars soon :evil pre-order for me anyway

I'm feeling like in 1985...

Por Tanni

Hero (556)

03-11-2006, 18:10

Ivan: ''Yesterday I read that I would receive an email to confirm the preorder. Haven't received anything so far. Have you experienced the same?''

You'll get an e-mail right after preordering for finalizing the preorder, and after that, one saying One Chip MSX preorder completed. So it seems that something went wrong with your preorder. Maybe you should contact BAZIX to ask what's happened.

Por dumfrog

Resident (45)

03-11-2006, 18:16

>If you aren't going to VHDL yourself (or run new VHDL code),
>I could imagine the OCM looks a tad overpriced.
Well, I don't plan to code VHDL but at that price, a brand new MSX with SCC/FM PAC/VGA & audio outputs/1Mb RAM/SD-CARD/built in MSXDOS 2 instead of my old HB700 and its blurry TV isn't that expensive

Por wolf_

Ambassador_ (10135)

03-11-2006, 18:44

naturally

It was aimed towards those with a 1337-MSX .. those ppz with a tR, g9k, all soundchips etc.

Por Prodatron

Paragon (1857)

03-11-2006, 18:52

I was also surprised by the high price, but as far as I understand, that would be only the worst case. I already ordered two of them

Por snout

Ascended (15187)

03-11-2006, 18:57

Dumfrog: don't forget about the MegaSCSI/FAT16 thing!

Ivan (and others who did not receive order confirmation) - at first a confirmation mail in HTML is sent. This one might get stuck in spamfilters/junkfolders etc. -- unconfirmed orders will in time automatically receive a reminder in plaintext. If you're uncertain about it, please contact Bazix directly by e-mail.

Por Patsie

Master (254)

03-11-2006, 19:29

what is the minimum pre-order amount before it will go into production?

Por wolf_

Ambassador_ (10135)

03-11-2006, 19:38

unless my RAM fails me, it *will* be produced in any case.

Por Patsie

Master (254)

03-11-2006, 20:39

@wolf_:
a quote from the pre-order website of bazix: (see point 4)
If the One Chip MSX computer will not go into production, for whatever reason (such as a lack of sufficient pre-orders), your pre-order will be cancelled automatically.
and point 5:
You will receive an e-mail when a decision has been made whether or not to produce the One Chip MSX computer commercially.
So according to bazix, there should be enough preorders, or the whole deal will still blow off.

Por djh1697

Paragon (1736)

03-11-2006, 20:47

"Bazix are also offering a free One Chip MSX restore service to their customers for a full year after purchase. This means that if something goes wrong with updating the FPGA chip and you don't have a Byte Blaster cable, you can send the One Chip MSX to Bazix to get it restored for you."

what will be the charge after one year? all interesting stuff! I have not made my mind up if i should pre order one though ?

Por Bart

Paragon (1422)

03-11-2006, 20:50

Hi Djh, plz check: http://www.bazix.nl/faq_how_can_i_restore_an_incorrectly_updated_one_chip_msx.html

Por djh1697

Paragon (1736)

03-11-2006, 20:55

Thanks Bart - a reasonable e euro - i must admit that I am tempted - just wondering if it be able to be used with MegaROM images, since carring all my MegaROM's is a lot of trouble

Maybe my MegaRAM will work with out any problems, along with my Sunrise CF-IDE. A lovely combination

I wonder what reading you will get if you type ?peek(&hd), for the MSX version number?

Por snout

Ascended (15187)

03-11-2006, 21:38

Djh - In fact, there already is a VHDL extension that allows you to config the OCM as an MSX2 with an ESE-FlashROM in slot 2. I haven't tested MegaRAM, but the CF interface is no prob and I expect no problems with MegaRAM either. (MegaFlashROM works...)

Por SaebaMSX

Hero (533)

03-11-2006, 22:15

Hey, great new, I will try to get 2 of em.

I don't know about the image quality of the video ports... but which one do you recommend if a LCD TV has "only" HDMI, SCART (RGB), components and RCA and S-Video? Is it that complicated to build the VGA->SCART cable?

Por Ivan

Ascended (9373)

03-11-2006, 22:24

I also don't discard a second unit.

Por wolf_

Ambassador_ (10135)

03-11-2006, 23:25

Patsie: my 'will be produced' remark was based on this newspost..

Por DamageX

Master (217)

04-11-2006, 02:37

$274 I preordered one. I'll have to sell some other retro computer stuff to raise funds.

Por Patsie

Master (254)

04-11-2006, 08:29

@wolf_:
Okay, you're right. Perhaps I should rephrase my question better: How many preorders are neccesary before the european OCM will be produced?

Por TheIncantation

Supporter (14)

04-11-2006, 08:43

I have waited fourteen years for a new MSX to shine at the horizon; now it does! Spreading it over fourteen years (that is 1.46 Euro a month) the total amount of 244.47 Euro seems fair... I know: lousy, diabolical argumentation, but it does not matter! That is what my wife heard from me when I pre-ordered the 1chipMSX.

Por Ivan

Ascended (9373)

04-11-2006, 08:58

How many preorders are neccesary before the european OCM will be produced?

1,000,000

Por spl

Paragon (1470)

04-11-2006, 10:13

SAEBA: As far as I know, OCM has Composite and SVHS TV output.

Por ARTRAG

Enlighted (6980)

04-11-2006, 10:24

I have filled the preorder form for the ONECHIP MSX. I will buy the product in any case, but I have some questions about its compatibility with the msx standard.

Does it exist some indicators of the level of compatibility of the Onechip with the real exiting MSX2 computers?
Does anyone have any info about the compatibility with the existing MSX1&2 software and games?
Does anyone have some benchmark to show the accuracy of the project, with respect to timings, VDP functions, z80 memory cycles etc?

I think that the availability of this kind of info would greatly improve the trust of the customers in this product.

Por Grauw

Ascended (10821)

04-11-2006, 14:31

Great news for everybody not in Japan!

(and props to Bazix for arranging it so quickly!)

Por Bastiaan

Champion (333)

04-11-2006, 14:41

So Cool!

but why all these complaints about the price? More (and cheaper) games available than for new console computers and
anyways: 245 Euro is a lot less than a brand new msx2 back in the 80's !

4 little questions:
-are both catridge slots usable for a slotexpander? (or what slots are used for audio/scc/scsi)
- how much of the 32 MB SD-ram is used in this default config?
-does the scc+ has it's own memory/RAM? like an expanded (SD)snatcher cart?
-are there any live demos planned before the closing of the preorder time?

Por Grauw

Ascended (10821)

04-11-2006, 14:50

Wolf: but all these modifications that you mention, although cool, makes software not work on original MSX-es anymore… So I’m not really thrilled by the idea, and think emulating existing devices like the OPL4 and v9990 would be better (by the way, emulating only the WAVE part of the OPL4 would at least be more compact than the full OPL4, and in 99% of the cases FM is (unfortunately) not used). Maybe adding support for that direct-vram-access mod is also a nice idea.

What does appeal to me mostly though, is to super-charge the CPU and add small-but-very-useful modifications like hardware support for breakpoints, exposing the read-only v9938/58 registers for debugging purposes, or maybe even output to a debug console through an I/O port (like in openMSX!). It will make a good developing environment .

~Grauw

Por wolf_

Ambassador_ (10135)

04-11-2006, 16:17

Grauw, that's like saying "nice this tR, but when making something for R800, it won't work on MSX1,2,2+, so let's rather not."

MSX has always been upwards compatible.

Por wolf_

Ambassador_ (10135)

04-11-2006, 16:20

Bastiaan: 19 november! It's close to the deadline tho. And it *might* not be close to you. :P

Por Bastiaan

Champion (333)

04-11-2006, 16:56

@ wolf_ groningen is indeed not very close to where I live

Por wolf_

Ambassador_ (10135)

04-11-2006, 17:07

Prodatron will also show up there to demo symbos, perhaps this event together with the OCM, might be a reason for a day out..

Por Vampier

Prophet (2415)

05-11-2006, 04:07

It seems that Bazix is really dedicated to the 'scene' and to their customers. I wrote a few e-mails to snout and they were answered very quickly, friendly and very courtesy. in the past I went on raves and rants about Bazix but they are serious about bringing the scene back to live (a bit) the development of the OCM can mean a very cool breaktrough.... and hopefully in the future it will have turbo-r support and v9900 etc etc.

I'll probably do a duo order with dvik

Por spl

Paragon (1470)

05-11-2006, 12:27

Thanks to OCM, I think there will be more MSX on parties

Por Patsie

Master (254)

05-11-2006, 15:24

unfortunately I still haven't got a (serious) reply to my question
so, bazix, again I ask: how many pre-orders do you need before the (european) OCM will be produced?

Por Ivan

Ascended (9373)

05-11-2006, 17:11

Patsie: if Bazix answers your question, which question would be the next one? How many preorders they have got? How much money are they earning? Bazix is a company, they are not forced to answer such questions.

Por Patsie

Master (254)

05-11-2006, 21:39

@ivan:
Do I ask an unreasonable question? You assumptions on 'what I will ask next' are pretty ridiculous. Do not assume on what you think I am going to ask next, of even if I'm going to ask anything else.
And you are right that they do not need to answer my question. The least they can do is tell that they do not want to reply with any numbers (if that is so)

Por snout

Ascended (15187)

07-11-2006, 01:30

Patsie - you did not ask a question to Bazix, you posted a comment to a newspost assuming someone from Bazix would read it and reply to it. Sending mails to the mail-adress found on the Bazix website is a lot more effective. That said, Bazix does not disclose the amount of pre-orders needed to make production possible, yet will announce it as soon as the 'production bar' has been met.

Por Ada

Resident (49)

07-11-2006, 16:09

Hi!

Just pre-ordered one unit! I have two questions, I couldn't find an answer to them:
- which is the resolution of the image displayed via VGA connector? The typical 1280x1024 used by TFT monitors?
- I thought the signal used in VGA connections is a progressive one. If it's correct, could it be possible to make an adapter and connect the OCM to a progressive TV by using the components' input?
Thanks!

Por djh1697

Paragon (1736)

08-11-2006, 18:28

I have just ordered one unit as well! I would order two, but cash is tight at the moment.

Looking forward to the first (?) OCM in the UK. Perhaps when pre-order is complete we should do a survey as to which country people are fom and how many they ordered ?

Por Patsie

Master (254)

08-11-2006, 18:53

snout: I could/should have been more clear who I addressed the question to. Thanks for the (semi)answer.

Por djh1697

Paragon (1736)

08-11-2006, 22:15

Good to have a brief chat earlier this evening Snout. I look forward to getting my OCM!

Por ARTRAG

Enlighted (6980)

09-11-2006, 20:41

About the level of accuracy of OCM....
Does Bazix plan to release updates of the firmware in case we find some issue?

The point is that there is no info at all about OCM's features, or about its compatibility with existing SW, or about benchmacks...
Some hints on the website (gradius running) let us hope that OCM will be accurate, but no statement is done about this matter.
This sounds like "this is an FPGA, look, the msx can be done, do it yourself"

I orderd the OCM, but what i'll get exactly ?
I hope that bugs will be corercted later... - or not ?

Por snout

Ascended (15187)

09-11-2006, 21:57

Artrag - Of course Bazix will offer updates in the OCM 'firmware' on the website, either improving accuracy or features. I'm really short on time these days, but with a bit of luck I might be able to do an 'Emulator Comparison test' for the OCM.

Por papa_november

Rookie (32)

11-11-2006, 04:44

THREE HUNDRED AMERICAN DOLLARS
THREE HUNDRED AMERICAN DOLLARS
THREE HUNDRED AMERICAN DOLLARS

I wonder if they realise that at this point their market consists of the five people who paid $180 on eBay for SD Snatcher and already have a closet filled with Turbo-Rs.

Por ARTRAG

Enlighted (6980)

11-11-2006, 15:28

you can have a ps3 for less money

Por wolf_

Ambassador_ (10135)

11-11-2006, 16:03

While it doesn't make a diff to the consumer, you can't ofcourse compare mass-production with limited production. One chip costs a $million, a million chips cost $one each.

Por wolf_

Ambassador_ (10135)

12-11-2006, 00:14

There used to be 6 > symbols at the Bazix OCM page @ 100% stock. Now they mention over 50% was ordered, and 4 > symbols remain. That's .. interesting, from a mathematical pov! ^_^ So, just for the risk of that slider NOT being linear, I pre-oredered an OCM.

Por xantia

Supporter (2)

12-11-2006, 16:08

Hello msx friends,

This is my first post on MRC and what a better way to start than with the announcement that i pre-ordered a OCM.
And now the long waiting starts

Por cronos

Rookie (23)

12-11-2006, 16:49

EXPENSIVE. but I put pre-order and waiting crossing my fingers......

Por Durany

Rookie (29)