Msx (home made) one chip

By jpgrobler

Master (154)

Аватар пользователя jpgrobler

23-06-2005, 18:38


If the msx one chip project does not get off the ground commercially (I hope it does) have the advances been enough (FPGA code etc + ESE 2 project and others) that home made msx one chips will be made?


Для того, чтобы оставить комментарий, необходимо регистрация или !login

By flyguille

Prophet (3031)

Аватар пользователя flyguille

23-06-2005, 19:49

I thinks that the HOME construction of the 1CM isn't an option...

just because the surface tech required is not for begginers... only robots or experts with professional equipment.

and only the PCB will cost the half of the 1CM itself!

By idrougge

Resident (44)

Аватар пользователя idrougge

07-07-2005, 01:15

By snout

Ascended (15187)

Аватар пользователя snout

07-07-2005, 01:19

idrougge: That more or less -is- the One Chip MSX. It's the prototype Wink

By Pat

Expert (71)

Аватар пользователя Pat

07-07-2005, 08:42

This depends on what kind of functionality you want. You can always use a FPGA prototyping kit (several vendors offer these). But then you don't have al the connectivity like joystick port, MSX slots etc. And the kit's that are available do not always have a TV or VGA output.

Is the source code (VHDL) of the One Chip MSX available? Or is it closed source? It would need some tweaking to run on a prototyping kit.

By flyguille

Prophet (3031)

Аватар пользователя flyguille

18-07-2005, 22:50

NO, VGA, SD CARD, and other things are NOT supported by the VHDL code right now... so, if you buy it, you can't use it.

ASCII already said that is a upgrade comming soon.

But they didn't said at which cost.