OPL4 Shockwave 2 - New product pre-sale

Tecnobytes is back with a brand new OPL4 kit for your computer.

Design
The OPL4 SHOCKWAVE 2 is smaller than its predecessor and fits in a small cartridge case.
Output
As the new size will not accept the RCA connectors, it will now have a P2 stereo output.
More Output
The OPL4 sound is mixed with the internal MSX sound. In others words, you can listen the OPL4 SHOCKWAVE 2 sound through the MSX sound output (mono).
More Memory
The OPL4 SHOCKWAVE 2 has twice the RAM capacity of the original OPL4 (2MB instead of 1MB).
Well.. let's talk about the new batch:
1. Tecnobytes will post here on the site, the list of buyers in the order in which they're receiving payments. So everyone can follow the progress. These updates can take up to 48 hours to complete; Check the list in the end of this post!
2. If Tecnobytes can not reach the minimum quantity of 20 units, they will cancel the project and return the payments;
3. Tecnobytes will only begin to buy the parts and send the board for manufacturing when that number is reached;
4. Between the purchase of parts, manufacturing and later assembly, Tecnobytes can have from 2 to 3 months. It all depends on customs and our couriers. They will keep everyone informed.

Go and pre-order the new OPL4 cartridge from Tecnobytes!

Relevant link: tecnobytes homepage
Relevant link: OPL4 SHOCKWAVE 2 buyers list on Tecnobytes' website

Комментарии (43)

By Grauw

Ascended (10820)

22-04-2018, 16:29

Good to have more memory! Also the smaller size is welcome I think. The output to the MSX is nice as well, though on the original MoonSound iirc this was omitted to reduce interference, I assume here it’s done in a way that it’s not an issue?

Question: what’s P2 stereo output? TRS 3.5 mm jack socket?

By Parn

Paladin (854)

23-04-2018, 14:52

Grauw wrote:

Question: what’s P2 stereo output? TRS 3.5 mm jack socket?

Exactly. TRS connectors are known in Brazil as P1 (2.5mm), P2 (3.5mm) and P10 (6.35mm).

By hamlet

Scribe (4106)

23-04-2018, 16:13

It is s desirable product, combining unrivaled sound possibilities and plenty of memory.
Great!
I' also bought the Powergraph from Tecnobytes, which provides a good quality and service.
The only disadvantages are the shipping cost and duty, which increase the comparatively nice price.
Brazil must be a wonderful country.
Keep the good work going!

By FiXato

Scribe (1743)

23-04-2018, 18:30

Do think it's a bit odd to have the list of buyers public...

By Parn

Paladin (854)

23-04-2018, 18:35

If you're worried about privacy issues you can place your order with an alias.

EDIT: Just a small clarification: they've always done this way. I'm not sure why, though.

By lintweaker

Champion (474)

26-04-2018, 16:23

It seems they made the minimum of 20 orders!

By meits

Scribe (6571)

26-04-2018, 19:44

What I'd like to know is how it sounds. I know the Moonsound, both Dal-So-Ri and FM-Blaster/Woz-Blaster which all sound quite different than the other. I just never heard a Shockwave. Is there someone who can record a comparison with any of the above? It'd be a bit weird to buy buy a fifth one if it sounds worse. But if it sounds better, I just need it. Especially in case it sounds better than both Dal-So-Ri which are the best sounding opl4 devices I have.

By msd

Paragon (1532)

26-04-2018, 23:26

The question Grauw asked is really important for the sound quality. The internal Msx sound is really noisy

By Parn

Paladin (854)

29-04-2018, 15:50

I have a Shockwave (first model, not this one) and a Wozblaster. Would a comparison between those two be of any interest? If so, I can provide a recording.

By meits

Scribe (6571)

29-04-2018, 21:11

If you could record both Shockwave and Wozblaster.
Please record the music linked to here

If your Wozblaster is unmodified, please record the Wozblaster version as loud as first file and keep the record level untouched when recording the Shockwave.

@msd:
One could always cut pin 49 of the cartridge :)

By Pencioner

Scribe (1609)

29-04-2018, 23:46

Meits wrote:

@msd:
One could always cut pin 49 of the cartridge

I did it three times since beginning of the year Last time i also soldered some RCA connector because i cut the pin from Modulon slotexpander, and i enjoyed the result. The noise level decreased to be like with YIS503IIIR computer. And yeah, Yamaha being really great with audio output, best of all computers i had. I wonder if it depends more to the MSX-Engine used or to external audio circuitry. But, the best audio from external cartridge and internal PSG comes with this computer. I suppose all the product line YIS503*, CX{5,7}M*, and YIS604* has the same great audio btw.

By Parn

Paladin (854)

01-05-2018, 16:19

Meits wrote:

If you could record both Shockwave and Wozblaster.

I would, but as I turned on my Wozblaster it popped a cap and now I'm afraid to turn the computer with it on. It was C22, the capacitor closest to the audio out.

Aaand my Shockwave seems to have died as well. It is detected by all programs that use it, but no sound comes out. I hope it's not a serious problem.

By meits

Scribe (6571)

01-05-2018, 19:31

That must be one of the sadest days of your life

By Pencioner

Scribe (1609)

02-05-2018, 00:21

I can record Wozblaster and DalSoRi for comparison, are you interested?

By meits

Scribe (6571)

02-05-2018, 03:56

i have both wozblaster (clone by reprofactory) and dal-so-ri. If you can record shockwave, i'd like to compare it to dal-so-ri. The finest opl4 cartridge I've heard up to now.

By Pencioner

Scribe (1609)

02-05-2018, 08:29

i have no shockwave, sorry but my wozblaster is not a reprofactory-made one but homebrew rev 2 from here - don't know if it has reall difference in sound, though (but might have because pcb has been modified)

By Parn

Paladin (854)

02-05-2018, 20:55

Meits wrote:

That must be one of the sadest days of your life

I used a lot both cartridges, especially the Shockwave, so it was very upsetting. I'll have to resort to OpenMSX to keep my projects going, but it just doesn't sound the same. I find the emulated sound strange; a bit too clear, for better and for worse.

By Grauw

Ascended (10820)

02-05-2018, 21:38

Maybe pay Leonard a visit…

By Parn

Paladin (854)

03-05-2018, 18:09

Will do! He's currently fixing my recently acquired turboR, which seems to have been taken for a swim in the past.

By hamlet

Scribe (4106)

08-05-2018, 14:13

Quote:

...which seems to have been taken for a swim in the past.

By Pencioner

Scribe (1609)

08-05-2018, 15:07

I can not resist a scary feeling every time i see this photo

By Parn

Paladin (854)

08-05-2018, 16:20

Awesome picture, as expected from hamlet.

By volteco

Supporter (5)

01-06-2018, 17:05

Hi Everyone, Does anyone know the best way to reach Tecnobytes? I tried contacting them on Facebook but haven't got any response.

By rogerio.belarmino

Expert (79)

02-06-2018, 11:42

Hello how are you ??

Thank you for your contact and sorry for the delay in response and why we are in Retrorio the event that (31/05 to 02/06) and took us the delay in responding to our customers, we have a unit of Powergraph Light, which you can buy without the shipment already has already bought the Shockwave 2 and this and link:

http://www.tecnobytes.com.br/p/v9990-powergraph-light.html.

Please choose the item (without shipping + video adapter R $ 440,00.

Att

By volteco

Supporter (5)

04-06-2018, 15:51

Awesome, thank you very much! Order placed!

By lintweaker

Champion (474)

19-06-2018, 16:35

Any updates wrt OPL4 Shockwave 2? I e-mailed technobytes but got no response.

By rogerio.belarmino

Expert (79)

20-06-2018, 15:03

Please can not identify you by your nickname and your email to respond please inform me that we will get back to you immediately

By lintweaker

Champion (474)

20-06-2018, 16:56

rogerio.belarmino wrote:

Please can not identify you by your nickname and your email to respond please inform me that we will get back to you immediately

Mail sent last Saturday and again today to Ricardo

By rogerio.belarmino

Expert (79)

20-06-2018, 20:59

dear lintweaker

I went to check again and your email did not arrive I verified everything up in the spam box, I ask you to resend the email again to tecnobytesbrasil@gmail.com.
About Shockwave 2 we are in production it will be shipped next month (July) to all buyers....

By lintweaker

Champion (474)

21-06-2018, 17:42

rogerio.belarmino wrote:

dear lintweaker

Odd about the mail. But the news about July, that's all I wanted to know :-)

By rogerio.belarmino

Expert (79)

24-07-2018, 14:25

Shockwave 2 News in: www.tecnobytes.com.br

By lintweaker

Champion (474)

24-07-2018, 16:23

Great news, awesome! Looking forward to it.

By volteco

Supporter (5)

26-07-2018, 19:12

Hello

Any update on the shipping? I have also ordered Powergraph!

My name is Konstantin Danilov.

Thank you!!

By lintweaker

Champion (474)

31-07-2018, 17:20

Any news wrt shipping?

By volteco

Supporter (5)

31-07-2018, 17:49

My package is in the mail! I have received the tracking number from Tecnobytes!

By Angelo Sanna

Expert (68)

01-08-2018, 00:17

volteco wrote:

My package is in the mail! I have received the tracking number from Tecnobytes!

Strange, not one time i've got any reaction from Tecnobytes at all.

Send a message through the website 2,5 weeks ago. Result: no reaction.
Send an email to tecnobytes a week ago. Result: no reaction.
Send a message a week ago to Rogerio through the message system of msx.org. Result: no reaction.
Send today again an email to tecnobytes. No reaction.
Send today to the Facebook of Rogerio an message. No reaction at this moment.

It is clear that communication is not a good quality of Tecnobytes. I can't understand this kind of behaviour to your costumer. I hope that the shipment will take place, will be without any problems, because I don't have a good feeling about this. Why you have already a tracking number, and I've got no ANY reaction about the shipment?

By Angelo Sanna

Expert (68)

01-08-2018, 15:55

Well, finaly got today the tracking number by email. But still not any reaction why it take so long, and why there was no answer earlyer. This was the last time I ordered there.

By lintweaker

Champion (474)

01-08-2018, 16:47

Got my tracking today as well.

By rogerio.belarmino

Expert (79)

04-08-2018, 20:20

We apologize for the inconvenience.

By Angelo Sanna

Expert (68)

12-08-2018, 17:19

rogerio.belarmino wrote:

We apologize for the inconvenience.

It's ok.

I'm very happy with it. It works good, very nice packaging, and the configuration is also very nice and good (small cartridge, 3,5mm jack stereo, 2MB Sample RAM). And of course the CD with it, I was suprised by this! Well done Tecnobytes.

Now I can look-up my old MB Wave disks from 1996, and play my old produced stuff again.

By iamweasel2

Paladin (722)

13-08-2018, 04:54

Angelo Sanna wrote:

Now I can look-up my old MB Wave disks from 1996, and play my old produced stuff again.

Don't forget to share your produced stuff with us.

By rolandve

Champion (372)

15-06-2023, 09:42

Is technobyte still in business? Recently they announced a new batch of OPL4 cards. I ordered one (paid) and since that moment: silence. I tried contacting them, no reply.

By Briqunullus

Paladin (764)

15-06-2023, 22:51

I don't know anything about Tecnobytes, but you're not the first to ask such a question. However, as far as I know, they have always delivered.

These guys probably have day jobs, family time and what not. They will do MSX in whatever time that's left. And for what I have seen on this forum, they prioritize getting the stuff built over cliënt communication. Maybe they should install some type of auto-reply.

OPL4 Shockwave 2 - New product pre-sale

Share

Комментарии (43)